ALLOY CARBON TOOL STEEL.1

Approx. Rs 500 / KgGet Latest Price

SFS 510 alloy steel is a high-strength, low-alloy steel that is commonly used in the construction industry. It is a medium-carbon steel with added chromium, molybdenum, and vanadium, which gives it good strength, toughness, and weldability.

SFS 510 alloy steel bars are typically used for making structural components such as beams, columns, and plates. They are also used for making machine parts that require high strength and wear resistance.

The following are some of the properties of SFS 510 alloy steel:

• Tensile strength: 1100-1200 MPa
• Yield strength: 800-900 MPa
• Elongation: 15-20%
• Hardness: 220-250 HB

SFS 510 alloy steel is a good choice for applications where high strength, toughness, and weldability are required. It is also relatively easy to machine and fabricate, making it a versatile material for a variety of applications.

Here are some of the uses of SFS 510 alloy steel:

• Structural components in the construction industry
• Machine parts that require high strength and wear resistance
• Gears, shafts, and other rotating parts
• Springs and other load-bearing components
• Tools and dies

If you are looking for a high-strength, tough, and weldable alloy steel for your next project, SFS 510 is a good option to consider.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• X10CrMoVNb9-1 is a high-strength, high-nitrogen alloy steel that is used in a variety of applications, including pressure vessels, gears, and shafts. It is known for its good strength, toughness, and resistance to wear and corrosion.

• The chemical composition of X10CrMoVNb9-1 steel is as follows:

  • Carbon: 0.35% to 0.42%
  • Manganese: 0.60% to 0.90%
  • Chromium: 1.25% to 1.50%
  • Molybdenum: 0.60% to 0.80%
  • Vanadium: 0.10% to 0.15%
  • Niobium: 0.05% to 0.10%

• The minimum yield strength of X10CrMoVNb9-1 steel is 900MPa, and the tensile strength is 1300MPa.

• X10CrMoVNb9-1 steel can be heat treated to increase its strength. The steel can be quenched and tempered to achieve a yield strength of up to 1600MPa.

• Here are some of the benefits of using X10CrMoVNb9-1 steel:

  • It is strong and durable.
  • It is tough and resistant to wear.
  • It is resistant to corrosion.
  • It is weldable.
  • It is cost-effective.

• If you are looking for a strong, durable, and versatile steel bar for your pressure vessel, gear, or shaft application, then X10CrMoVNb9-1 steel is a good option.

Here are some of the applications of X10CrMoVNb9-1 steel:

• Pressure vessels.
• Gears.
• Shafts.
• Turbine blades.
• Valves.
• Corrosion-resistant applications.
• Wear-resistant applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• S106 is a high-strength, low-alloy steel that is commonly used in the oil & gas, power generation, and chemical industries. It is also known as EN 10083-3 1.7225 steel.
• S106D round bars are a common form of this steel that are used in applications such as:
  • Valves
  • Pumps
  • Turbines
  • Heat exchangers
  • Compressors
• The chemical composition of S106 alloy steel is as follows:
  • Carbon: 0.40-0.45%
  • Chromium: 1.0-1.4%
  • Manganese: 0.6-0.9%
  • Molybdenum: 0.2-0.3%
  • Sulfur: 0.04%
  • Phosphorus: 0.04%
• The mechanical properties of S106 alloy steel vary depending on the heat treatment. However, typical properties include:
  • Yield strength: 640 MPa
  • Ultimate tensile strength: 890 MPa
  • Elongation: 12-16%
  • Hardness: 28-34 HRC
• S106 alloy steel can be nitrided to improve its hardness and wear resistance. This makes it a suitable material for applications where high-pressure and high-wear conditions are present.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 200 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 150 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK.
• Packaging Details: AS PER CLIENT REQUIREMENT.

Approx. Rs 100 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK.
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 150 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK.
• Packaging Details: AS PER CLIENT REQUIREMENT.

Approx. Rs 500 / KgGet Latest Price

• DIN 1.7386 is a medium-carbon alloy steel that is used in the automotive, aerospace, and other industries. It is known for its good strength, toughness, and wear resistance.
• The chemical composition of DIN 1.7386 steel is as follows:
  • Carbon: 0.35% to 0.42%
  • Manganese: 0.60% to 0.90%
  • Chromium: 1.25% to 1.50%
  • Molybdenum: 0.80% to 1.00%
  • Vanadium: 0.15% to 0.25%
• The minimum yield strength of DIN 1.7386 steel is 600MPa, and the tensile strength is 850MPa.
• DIN 1.7386 steel can be heat treated to increase its strength. The steel can be quenched and tempered to achieve a yield strength of up to 1100MPa.
• Here are some of the benefits of using DIN 1.7386 steel:
  • It is strong and durable.
  • It is tough and resistant to wear.
  • It is resistant to fatigue and corrosion.
  • It is weldable.
  • It is cost-effective.
• If you are looking for a strong, durable, and versatile steel bar for your automotive, aerospace, or other project, then DIN 1.7386 steel is a good option.

Here are some of the applications of DIN 1.7386 steel:

• Gears.
• Shafts.
• Axles.
• Bearings.
• Tools.

If you are interested in using DIN 1.7386 steel for your project, you should contact a steel supplier to discuss your requirements.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 200 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 kg
• Delivery Time: IMMEDIATE EX OUR WORK.
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• ASTM A182 Grade F12 Class 2 is a high-strength, low-alloy steel that is used in a variety of applications, including pressure vessels, gears, and shafts. It is known for its good strength, toughness, and resistance to corrosion.

• The chemical composition of ASTM A182 Grade F12 Class 2 steel is as follows:

  • Carbon: 0.25% to 0.35%
  • Manganese: 0.60% to 0.90%
  • Chromium: 12.00% to 14.00%
  • Molybdenum: 1.00% to 1.20%

• The minimum yield strength of ASTM A182 Grade F12 Class 2 steel is 750MPa, and the tensile strength is 1100MPa.

• ASTM A182 Grade F12 Class 2 steel can be heat treated to increase its strength. The steel can be quenched and tempered to achieve a yield strength of up to 1500MPa.

• Here are some of the benefits of using ASTM A182 Grade F12 Class 2 steel:

  • It is strong and durable.
  • It is tough and resistant to wear.
  • It is resistant to corrosion.
  • It is weldable.
  • It is cost-effective.

• If you are looking for a strong, durable, and versatile steel bar for your pressure vessel, gear, or shaft application, then ASTM A182 Grade F12 Class 2 steel is a good option.

Here are some of the applications of ASTM A182 Grade F12 Class 2 steel:

• Pressure vessels.
• Gears.
• Shafts.
• Turbine blades.
• Valves.
• Corrosion-resistant applications.
• Wear-resistant applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

EN3B is a specific grade of low carbon alloy steel that conforms to the European standard EN 10025. It is a popular engineering steel that offers good machinability, weldability, and moderate strength. EN3B is often used in applications where toughness and ductility are important, such as in the production of shafts, gears, and components for general engineering purposes.

Round bars and rods made from EN3B alloy steel are readily available in the market. These bars and rods are commonly used in various industries, including automotive, construction, and manufacturing.

When purchasing EN3B round bars and rods, it is important to consider your specific requirements. Factors to consider include the desired diameter, length, surface finish, and any additional specifications or tolerances. It is advisable to consult with suppliers or manufacturers to ensure you obtain the right product for your needs.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

EU EN 17Cr3 alloy steel bar is a high-strength, wear-resistant steel that is commonly used in construction, machinery, and transportation applications. It is made of a combination of chromium, molybdenum, and vanadium, which gives it its high strength and wear resistance. EU EN 17Cr3 alloy steel bar is available in a variety of sizes and shapes, including round bars, square bars, and hex bars.

The EU EN 17Cr3 designation is the European standard for this type of steel. The number 17 indicates that the steel bar has a tensile strength of 1700 MPa, a yield strength of 1100 MPa, and a hardness of 220 HB. The Cr3 designation indicates that the steel bar contains 0.8-1.2% chromium, 0.1-0.3% molybdenum, and 0.1-0.3% vanadium.

Here are some of the properties of EU EN 17Cr3 alloy steel bar:

• High strength: EU EN 17Cr3 alloy steel bar has a tensile strength of up to 1700 MPa, which makes it one of the strongest steels available.
• Wear resistance: EU EN 17Cr3 alloy steel bar is highly resistant to wear, making it ideal for applications where there is a lot of friction.
• Toughness: EU EN 17Cr3 alloy steel bar is also tough, which means that it can withstand impact without breaking.
• Corrosion resistance: EU EN 17Cr3 alloy steel bar is resistant to corrosion, making it suitable for use in harsh environments.

Here are some of the applications of EU EN 17Cr3 alloy steel bar:

• Construction: EU EN 17Cr3 alloy steel bar is used in the construction of bridges, buildings, and other structures.
• Machinery: EU EN 17Cr3 alloy steel bar is used in the manufacture of machinery, such as gears, shafts, and bearings.
• Transportation: EU EN 17Cr3 alloy steel bar is used in the manufacture of transportation vehicles, such as cars, trucks, and trains.

If you are looking for a high-strength, wear-resistant steel for your application, then EU EN 17Cr3 alloy steel bar is a good option. It is available in a variety of sizes and shapes, and it has a wide range of applications.

Here are some suppliers of EU EN 17Cr3 alloy steel bar in Mumbai, India:

• Simplex Steel & Alloy
• Aurum Alloys & Engineering LLP
• Alloy Steel Technology

I hope this helps!

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

EUEN DIN UNI 20MnCr5 is a commonly used alloy steel grade that is widely recognized and conforms to multiple international standards. Here's a breakdown of the different standards and their corresponding designations for 20MnCr5 alloy steel:

• EU standard: 20MnCr5 (EN 10084)
• DIN standard: 20MnCr5 (DIN 17210)
• UNI standard: 20MnCr5 (UNI 7846)

ISO 20MnCr5 is not a specific standard designation but is often used interchangeably with the above-mentioned standards.

Round bars and rods made from 20MnCr5 alloy steel are readily available in the market. This grade is known for its excellent hardenability, high strength, and good wear resistance. It is commonly used in the production of gears, shafts, sprockets, and other components that require high toughness and surface hardness.

When purchasing 20MnCr5 round bars and rods, it's important to consider the specific requirements of your application. Factors to consider include the desired diameter, length, surface finish, and any additional specifications or tolerances. Consulting with suppliers or manufacturers will help ensure you obtain the right product for your needs.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• JIS SCM430 is a medium-carbon alloy steel that is used in a variety of applications, including the automotive, machinery, and construction industries. It is known for its good strength, toughness, and resistance to wear and corrosion.
• The chemical composition of JIS SCM430 steel is as follows:
  • Carbon: 0.35% to 0.42%
  • Manganese: 0.60% to 0.90%
  • Chromium: 0.80% to 1.10%
  • Molybdenum: 0.20% to 0.35%
• The minimum yield strength of JIS SCM430 steel is 550MPa, and the tensile strength is 800MPa.
• JIS SCM430 steel can be heat treated to increase its strength. The steel can be quenched and tempered to achieve a yield strength of up to 1100MPa.
• Here are some of the benefits of using JIS SCM430 steel:
  • It is strong and durable.
  • It is tough and resistant to wear.
  • It is resistant to corrosion.
  • It is weldable.
  • It is cost-effective.
• If you are looking for a strong, durable, and versatile steel bar for your automotive, machinery, or other project, then JIS SCM430 steel is a good option.

Here are some of the applications of JIS SCM430 steel:

• Gears.
• Shafts.
• Axles.
• Bearings.
• Tools.
• Springs.
• Valves.
• Construction equipment.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• AFNOR 16MC5 is a medium-carbon alloy steel that is used in a variety of applications, including the automotive, aerospace, and oil and gas industries. It is known for its good strength, toughness, and wear resistance.

  
  

   

• The chemical composition of AFNOR 16MC5 steel is as follows:

  • Carbon: 0.35% to 0.42%
  • Manganese: 0.60% to 0.90%
  • Chromium: 1.00% to 1.20%
  • Molybdenum: 0.20% to 0.35%

• The minimum yield strength of AFNOR 16MC5 steel is 600MPa, and the tensile strength is 900MPa.

• AFNOR 16MC5 steel can be heat treated to increase its strength. The steel can be quenched and tempered to achieve a yield strength of up to 1100MPa.

• Here are some of the benefits of using AFNOR 16MC5 steel:

  • It is strong and durable.
  • It is tough and resistant to wear.
  • It is resistant to corrosion.
  • It is weldable.
  • It is cost-effective.

• If you are looking for a strong, durable, and versatile steel bar for your automotive, aerospace, or other project, then AFNOR 16MC5 steel is a good option.

Here are some of the applications of AFNOR 16MC5 steel:

• Gears.
• Shafts.
• Axles.
• Bearings.
• Tools.
• Springs.
• Valves.
• Oil and gas pipelines.
• Turbine blades.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• AFNOR XC18 is a medium-carbon, alloy steel with added chromium.Opens in a new  AFNOR XC18 Alloy Steel Bar
• It is a quenched and tempered steel, which means that it is first heated to a high temperature and then cooled rapidly to increase its strength and toughness.
• AFNOR XC18 alloy steel bars are typically used for making structural components, machine parts, and tools that require high strength and toughness.
• They are also used for making components that are exposed to wear and corrosion.
• The following are some of the properties of AFNOR XC18 alloy steel:
  • Tensile strength: 800-1000 MPa
  • Yield strength: 550-750 MPa
  • Elongation: 15-20%
  • Hardness: 200-250 HB
• AFNOR XC18 alloy steel is a good choice for applications where high strength, toughness, and wear resistance are required. It is also relatively easy to machine and fabricate, making it a versatile material for a variety of applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• 32CrMoV12-10 is a medium-carbon alloy steel that is used in a variety of applications, including the automotive, aerospace, and oil and gas industries. It is known for its good strength, toughness, and wear resistance.
• The chemical composition of 32CrMoV12-10 steel is as follows:
  • Carbon: 0.35% to 0.42%
  • Manganese: 0.60% to 0.90%
  • Chromium: 1.25% to 1.50%
  • Molybdenum: 0.80% to 1.00%
  • Vanadium: 0.10% to 0.15%
• The minimum yield strength of 32CrMoV12-10 steel is 600MPa, and the tensile strength is 900MPa.
• 32CrMoV12-10 steel can be heat treated to increase its strength. The steel can be nitrided to achieve a yield strength of up to 1300MPa.
• Here are some of the benefits of using 32CrMoV12-10 steel:
  • It is strong and durable.
  • It is tough and resistant to wear.
  • It is resistant to corrosion.
  • It is weldable.
  • It is cost-effective.
• If you are looking for a strong, durable, and versatile steel bar for your automotive, aerospace, or other project, then 32CrMoV12-10 steel is a good option.

Here are some of the applications of 32CrMoV12-10 steel:

• Gears.
• Shafts.
• Axles.
• Bearings.
• Tools.
• Springs.
• Valves.
• Oil and gas pipelines.
• Turbine blades.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• Chemical composition: Carbon: 0.25-0.3%, Chromium: 1.2-1.6%, Manganese: 0.7-0.9%, Nickel: 0.4-0.6%, Phosphorus: 0.03%, Sulfur: 0.03%Opens in a new windowm.indiamart.comPN 15HG Alloy Steel Bar
• Tensile strength: 650-750 MPa
• Yield strength: 420-520 MPa
• Hardness: 210-250 HB
• Elongation: 12-16%
• Impact toughness: 45-60 Joules

PN 15 HG alloy steel is a high-strength, low-alloy steel that is known for its good combination of strength, toughness, and weldability. It is often used in applications where high loads and impact are present, such as gears, shafts, and axles.

It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and weldability.

PN 15 HG alloy steel is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

Alloy 300M is a high-strength, low-alloy steel that is used in a variety of applications, including aircraft components, gears, and shafts. It is known for its high strength, toughness, and fatigue resistance.

Alloy 300M is a vacuum-melted steel that is produced to very tight chemical and microstructural specifications. This ensures that the steel has the desired properties for its intended application.

Alloy 300M is available in a variety of forms, including round bars, flat bars, and forgings. It is typically supplied in the annealed condition, but it can also be supplied in the quenched and tempered condition.

The mechanical properties of Alloy 300M vary depending on the condition of the steel. However, they typically have a yield strength of 450 MPa (65,000 psi) and an ultimate tensile strength of 820 MPa (120,000 psi).

Alloy 300M is a good choice for applications where high strength, toughness, and fatigue resistance are required. It is also a good choice for applications where the steel will be exposed to high temperatures.

Here are some of the advantages of using Alloy 300M:

• High strength
• Good toughness
• Fatigue resistance
• High-temperature resistance
• Can be made to precise tolerances

Here are some of the disadvantages of using Alloy 300M:

• More expensive than other types of steel
• Not as readily available as other types of steel
• May require special machining or finishing

Overall, Alloy 300M is a good choice for applications where high strength, toughness, and fatigue resistance are required. However, it is more expensive than other types of steel, so it may not be the best choice for all applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• C22E is a medium-carbon, alloy steel with added chromium, molybdenum, and nickel.
• It is a quenched and tempered steel, which means that it is first heated to a high temperature and then cooled rapidly to increase its strength and toughness.
• C22E alloy steel bars are typically used for making structural components, machine parts, and tools that require high strength and toughness.
• They are also used for making components that are exposed to wear and corrosion.
• The following are some of the properties of C22E alloy steel:
  • Tensile strength: 900-1100 MPa
  • Yield strength: 650-750 MPa
  • Elongation: 15-20%
  • Hardness: 220-250 HB
• C22E alloy steel is a good choice for applications where high strength, toughness, and wear resistance are required. It is also relatively easy to machine and fabricate, making it a versatile material for a variety of applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• UNI C25 is a medium-carbon alloy steel with added chromium.
• It is a quenched and tempered steel, which means that it is first heated to a high temperature and then cooled rapidly to increase its strength and toughness.
• UNI C25 alloy steel bars are typically used for making structural components, machine parts, and tools that require high strength and toughness.
• They are also used for making components that are exposed to wear and corrosion.
• The following are some of the properties of UNI C25 alloy steel:
  • Tensile strength: 900-1100 MPa
  • Yield strength: 650-750 MPa
  • Elongation: 15-20%
  • Hardness: 220-250 HB
• UNI C25 alloy steel is a good choice for applications where high strength, toughness, and wear resistance are required. It is also relatively easy to machine and fabricate, making it a versatile material for a variety of applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• DIN CK40 is a medium-carbon alloy steel with a carbon content of 0.40%.
• It is a quenched and tempered steel, which means that it is first heated to a high temperature and then cooled rapidly to increase its strength and toughness.
• DIN CK40 alloy steel bars are typically used for making structural components, machine parts, and tools that require high strength and toughness.
• They are also used for making components that are exposed to wear and corrosion.
• The following are some of the properties of DIN CK40 alloy steel:
  • Tensile strength: 1000-1200 MPa
  • Yield strength: 700-900 MPa
  • Elongation: 15-20%
  • Hardness: 220-250 HB
• DIN CK40 alloy steel is a good choice for applications where high strength, toughness, and wear resistance are required. It is also relatively easy to machine and fabricate, making it a versatile material for a variety of applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• UNI C40 alloy steel bar is a medium carbon steel with good strength and toughness.
• It is commonly used in the construction, automotive, and machinery industries.
• The chemical composition of UNI C40 alloy steel bar is as follows:
  • Carbon: 0.4%
  • Manganese: 0.8%
  • Chromium: 0.4%
  • Silicon: 0.3%
  • Molybdenum: 0.03%
• The tensile strength of UNI C40 alloy steel bar is typically in the range of 500-600 MPa.
• The yield strength is typically in the range of 350-450 MPa.
• The hardness is typically in the range of 20-22 HRC.
• UNI C40 alloy steel bar can be heat treated to achieve different hardness levels. The most common heat treatment is quenching and tempering, which produces a hardness of 20-22 HRC.

Here are some of the applications of UNI C40 alloy steel bar:

• Structural components
• Machine parts
• Tools and dies
• Bearings
• Gears
• Springs
• Shafts

If you are looking for a medium carbon steel with good strength and toughness, then UNI C40 alloy steel bar is a good option to consider.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

AFNOR 20MC5 alloy steel bar is a high-strength, wear-resistant steel that is commonly used in construction, machinery, and transportation applications. It is made of a combination of chromium, molybdenum, and vanadium, which gives it its high strength and wear resistance. AFNOR 20MC5 alloy steel bar is available in a variety of sizes and shapes, including round bars, square bars, and hex bars.

The AFNOR designation stands for "Association Française de Normalisation", which is the French system for designating steel grades. The number 20MC5 indicates that the steel bar has a tensile strength of 1300 MPa, a yield strength of 900 MPa, and a hardness of 220 HB. The MC5 designation indicates that the steel bar contains 0.16-0.22% carbon, 1.00-1.20% manganese, 0.70-0.90% chromium, and 0.15-0.30% molybdenum.

Here are some of the properties of AFNOR 20MC5 alloy steel bar:

• High strength: AFNOR 20MC5 alloy steel bar has a tensile strength of up to 1300 MPa, which makes it one of the strongest steels available.
• Wear resistance: AFNOR 20MC5 alloy steel bar is highly resistant to wear, making it ideal for applications where there is a lot of friction.
• Toughness: AFNOR 20MC5 alloy steel bar is also tough, which means that it can withstand impact without breaking.
• Corrosion resistance: AFNOR 20MC5 alloy steel bar is resistant to corrosion, making it suitable for use in harsh environments.

Here are some of the applications of AFNOR 20MC5 alloy steel bar:

• Construction: AFNOR 20MC5 alloy steel bar is used in the construction of bridges, buildings, and other structures.
• Machinery: AFNOR 20MC5 alloy steel bar is used in the manufacture of machinery, such as gears, shafts, and bearings.
• Transportation: AFNOR 20MC5 alloy steel bar is used in the manufacture of transportation vehicles, such as cars, trucks, and trains.

If you are looking for a high-strength, wear-resistant steel for your application, then AFNOR 20MC5 alloy steel bar is a good option. It is available in a variety of sizes and shapes, and it has a wide range of applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• 6Mo3 is a high-strength, low-alloy steel that is commonly used in applications where high strength and toughness are important.Opens in a new window
• It is made up of the following elements:
  • Carbon: 0.17-0.22%
  • Chromium: 14-16%
  • Molybdenum: 0.4-0.5%
• The mechanical properties of 16Mo3 Alloy Steel Round Bars are as follows:
  • Yield strength: 750-850 MPa
  • Ultimate tensile strength: 950-1050 MPa
  • Hardness: 240-260 HB
• 16Mo3 Alloy Steel Round Bars can be heat treated to a hardness of 240-260 HB, which gives them excellent toughness and wear resistance.
• They are also available in a variety of sizes and shapes, including round, square, and hexagonal bars.
• They can be supplied in both hot-rolled and cold-drawn forms.

Some of the applications of 16Mo3 Alloy Steel Round Bars include:

• Gears
• Shafts
• Springs
• Tools
• Crankshafts
• Connecting rods
• Valves

If you are looking for a high-strength, low-alloy steel with good toughness and wear resistance, then 16Mo3 Alloy Steel Round Bars are a good option.

The 16Mo3 designation is a German standard for this type of alloy steel. It is also known as EN 10028-3 16Mo3 in some countries.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

13CrMo44 Alloy Steel, also known as 1.7335 Alloy Steel, is a high-strength, high-temperature alloy steel that is commonly used in applications where fatigue resistance and wear resistance are important.

• It is made up of the following elements:

  • Carbon: 0.17-0.21%
  • Chromium: 17-18%
  • Molybdenum: 0.5-0.7%
  • Vanadium: 0.2-0.3%

• The mechanical properties of 13CrMo44 Alloy Steel are as follows:

  • Yield strength: 900-950 MPa
  • Ultimate tensile strength: 1100-1200 MPa
  • Hardness: 260-300 HB

• 13CrMo44 Alloy Steel can be heat treated to a hardness of 260-300 HB, which gives it excellent fatigue resistance and wear resistance.

• It is also available in a variety of sizes and shapes, including round, square, and hexagonal bars.

• It can be supplied in both hot-rolled and cold-drawn forms.

• Some of the applications of 13CrMo44 Alloy Steel include:

  • Crankshafts
  • Connecting rods
  • Gears
  • Shafts
  • Valves

If you are looking for a high-strength, high-temperature alloy steel with good fatigue resistance and wear resistance, then 13CrMo44 Alloy Steel is a good option.

Here are some of the advantages of using 13CrMo44 Alloy Steel:

• High strength
• High-temperature resistance
• Fatigue resistance
• Wear resistance
• Good machinability
• Available in a variety of sizes and shapes

Here are some of the disadvantages of using 13CrMo44 Alloy Steel:

• Can be difficult to weld
• Can be susceptible to stress corrosion cracking
• Can be expensive

Overall, 13CrMo44 Alloy Steel is a good choice for applications where high strength, high-temperature resistance, fatigue resistance, and wear resistance are important.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• AISI SAE 1040 is a medium-carbon steel with a carbon content of 0.40%.Opens in a new windo
• It is a quenched and tempered steel, which means that it is first heated to a high temperature and then cooled rapidly to increase its strength and toughness.
• AISI SAE 1040 alloy steel bars are typically used for making structural components, machine parts, and tools that require high strength and toughness.
• They are also used for making components that are exposed to wear and corrosion.
• The following are some of the properties of AISI SAE 1040 alloy steel:
  • Tensile strength: 1000-1200 MPa
  • Yield strength: 700-900 MPa
  • Elongation: 15-20%
  • Hardness: 220-250 HB
• AISI SAE 1040 alloy steel is a good choice for applications where high strength, toughness, and wear resistance are required. It is also relatively easy to machine and fabricate, making it a versatile material for a variety of applications.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

• 14CrMo4-5 steel is a medium-carbon, high-chromium alloy steel that is used in a variety of applications, including gears, shafts, and axles. It is known for its good strength, toughness, and wear resistance.

• The chemical composition of 14CrMo4-5 steel is as follows:

  • Carbon: 0.30% to 0.35%
  • Manganese: 0.60% to 0.90%
  • Chromium: 1.10% to 1.30%
  • Molybdenum: 0.30% to 0.45%

• The minimum yield strength of 14CrMo4-5 steel is 600MPa, and the tensile strength is 900MPa.

• 14CrMo4-5 steel can be heat treated to increase its strength. The steel can be quenched and tempered to achieve a yield strength of up to 1100MPa.

• Here are some of the benefits of using 14CrMo4-5 steel:

  • It is strong and durable.
  • It is tough and resistant to wear.
  • It is resistant to corrosion.
  • It is weldable.
  • It is cost-effective.

• If you are looking for a strong, durable, and versatile steel bar for your gear, shaft, or axle application, then 14CrMo4-5 steel is a good option.

Here are some of the applications of 14CrMo4-5 steel:

• Gears.
• Shafts.
• Axles.
• Bearings.
• Tools.
• Springs.
• Valves.
• Oil and gas pipelines.
• Turbine blades.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 200 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

BS CS22 is a specific grade of alloy steel that conforms to the British Standard (BS) designation. However, I apologize for the confusion, but I couldn't find any specific information or references to the alloy steel grade "CS22" in reputable sources or industry standards.

It's possible that the term "CS22" may be a proprietary or internal designation used by a particular manufacturer or supplier. In such cases, the specific details and properties of the alloy steel would be known only to that entity.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

PN 18HGT is a specific grade of alloy steel that conforms to the Polish PN (Polska Norma) standard. However, I apologize for the confusion, but I couldn't find any specific information or references to the alloy steel grade "18HGT" in reputable sources or industry standards.

It's possible that the term "18HGT" may be a proprietary or internal designation used by a particular manufacturer or supplier in Poland. In such cases, the specific details and properties of the alloy steel would be known only to that entity.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

GOST 15KH is a specific grade of alloy steel that conforms to the Russian GOST standard. It is also known as 15Cr or 15X steel. The composition of GOST 15KH typically includes elements such as chromium and carbon, with smaller amounts of manganese, silicon, and sometimes nickel.

Round bars and rods made from GOST 15KH alloy steel are commonly available in the market. These bars and rods are utilized in various applications where good strength, hardness, and wear resistance are required. They are often used in the manufacturing of gears, shafts, axles, and other components for machinery and equipment.

When purchasing GOST 15KH round bars and rods, it is important to consider your specific requirements. Factors to consider include the desired diameter, length, surface finish, and any additional specifications or tolerances. It is advisable to consult with suppliers or manufacturers to ensure you obtain the right product for your needs.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

WNr 1.6546 is a specific grade of alloy steel that is also known as 40NiCrMoV7-3-3. It is a low-alloy steel that offers excellent toughness, high strength, and good hardenability. The composition of WNr 1.6546 typically includes elements such as nickel, chromium, molybdenum, vanadium, and carbon.

Round bars and rods made from WNr 1.6546 alloy steel are commonly available in the market. These bars and rods are utilized in various applications, including the manufacturing of heavy-duty machinery components, gears, shafts, and axles, where high strength and toughness are essential.

When purchasing WNr 1.6546 round bars and rods, it is important to consider your specific requirements. Factors to consider include the desired diameter, length, surface finish, and any additional specifications or tolerances. It is advisable to consult with suppliers or manufacturers to ensure you obtain the right product for your needs.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 500 / KgGet Latest Price

DIN 40NiCrMo2-2 is a specific grade of alloy steel that conforms to the German DIN EN 10083-3 standard. It is a quenched and tempered steel with a composition that includes nickel, chromium, molybdenum, and manganese. This alloy steel grade offers good hardenability, high strength, and toughness.

Round bars and rods made from DIN 40NiCrMo2-2 alloy steel are commonly available in the market. These bars and rods are used in various applications where high strength, durability, and resistance to wear and fatigue are required. They are often utilized in the manufacturing of components such as gears, shafts, axles, and other heavy-duty machinery parts.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 200 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 200 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 200 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK
• Packaging Details: AS PER CLIENT REQUIREMENT

Approx. Rs 200 / KgGet Latest Price

Alloy Steel 4330V, also known as UNS K23080, is a high-strength, low-alloy steel that offers excellent toughness and fatigue resistance. It is commonly used in applications where high tensile strength, impact resistance, and wear resistance are required.

The alloy steel 4330V is available in the form of bars, which can be used for various applications in industries such as aerospace, oil and gas, and automotive.

The AMS (Aerospace Material Specifications) designations AMS 6411 and AMS 6427 refer to specific specifications for alloy steel 4330V bars. These specifications outline the requirements for chemical composition, mechanical properties, and heat treatment of the material to ensure its suitability for aerospace applications.

Additionally, the ASTM A646 specification also applies to alloy steel 4330V bars. ASTM A646 sets the requirements for hot-wrought steel bars for special applications, including alloy steel bars used in high-stress and high-temperature environments.

These specifications ensure that alloy steel 4330V bars meet the necessary quality and performance standards for their intended applications.

When working with specific materials, it is always recommended to consult the latest industry standards, specifications, and technical data to ensure accurate and up-to-date information for your specific needs.

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK.
• Packaging Details: AS PER CLIENT REQUIREMENTS.

Approx. Rs 150 / KgGet Latest Price

Additional Information:

• Production Capacity: 5000 KG
• Delivery Time: IMMEDIATE EX OUR WORK.
• Packaging Details: AS PER CLIENT REQUIREMENTS.