Girgaon, Mumbai, Maharashtra
GST No. 27AABCK0892N1Z4
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Grade | M35 |
Usage/Application | Construction |
Single Piece Length | 6M |
Automation Grade | (HSS)-M2, M35, M42, T1 |
Material | (Alloy Tool Die Steel) |
Packaging Type | AS PER CLIENT REQUIREMENT |
All of these steels are alloy tool die steels, which means that they contain other elements in addition to carbon. These elements, such as chromium, tungsten, and molybdenum, give the steels their high wear resistance, toughness, and red hardness.
High speed steels are used in a variety of applications, including:
If you are looking for a high-performance steel that can withstand demanding applications, then high speed steel is a good option.
Here is a table that summarizes the properties of the four high speed steels:
Steel | Carbon | Chromium | Tungsten | Molybdenum | Cobalt | Red Hardness (°C) |
---|---|---|---|---|---|---|
M2 | 1.25% | 4.0% | 6.0% | 1.0% | 0.2% | 620 |
M35 | 1.35% | 4.0% | 6.5% | 1.5% | 5.0% | 650 |
M42 | 1.40% | 4.2% | 7.0% | 2.0% | 1.0% | 680 |
T1 | 1.10% | 4.0% | 5.0% | 1.0% | 0.0% | 600 |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Usage/Application | Construction |
Material | Carbon Steel |
Single Piece Length | 6 meter |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Surface Treatment | Annealed |
Surface Condition | ANNEALED |
Test Certificates | Available |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Construction |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | M2 |
Surface Treatment | Annealed |
Test Certificates | Available |
M2 High Speed Steel (HSS) is a type of tungsten-molybdenum-vanadium alloy steel that is known for its high hardness, strength, and wear resistance. It is often used in the manufacture of cutting tools, such as drills, saws, and end mills.
Opens in a
M2 HSS contains the following elements:
The high tungsten content in M2 HSS gives it its high hardness and wear resistance. The molybdenum and vanadium content give it its strength. The carbon content helps to improve the steel's hardenability.
M2 HSS is typically supplied in the hardened and tempered condition. The hardness of the steel can vary depending on the tempering temperature. The most common tempering temperature for M2 HSS is 200-220°C (390-425°F).
M2 HSS is a good choice for applications where high hardness, strength, and wear resistance are required. Some common applications of M2 HSS include:
Here are some of the advantages of using M2 High Speed Steel:
Here are some of the disadvantages of using M2 High Speed Steel:
Overall, M2 High Speed Steel is a good choice for applications where high hardness, strength, and wear resistance are required. However, it is more expensive than other types of steel, so it may not be the best choice for all applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Usage/Application | Construction |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | JIS SKD1 |
Surface Treatment | Annealed |
Test Certificates | Available |
JIS SKD1 is a good choice for applications where high strength, toughness, and wear resistance are required. Some common applications of JIS SKD1 include:
Here are some of the advantages of using JIS SKD1:
Here are some of the disadvantages of using JIS SKD1:
Overall, JIS SKD1 is a good choice for applications where high strength, toughness, and wear resistance are required. However, it is more expensive than other types of steel, so it may not be the best choice for all applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm -20mm |
Material | Carbon Steel |
Single Piece Length | 6 meter |
Usage/Application | Construction |
Minimum Order Quantity | 1000 KG |
Standard | S355J2 Round Bar / 1.0577 Bar / St52 Bar / St52-3N Bars |
Surface Treatment | Annealed |
S355J2 Round Bar, 1.0577 Bar, St52 Bar, and St52-3N Bars are all names for the same type of carbon steel. It is a non-alloy structural steel that is commonly used in construction, manufacturing, and offshore industries. It has excellent strength and weldability, and it is generally supplied in a normalized condition.
The chemical composition of S355J2 Round Bar is as follows:
The mechanical properties of S355J2 Round Bar are as follows:
S355J2 Round Bar is a versatile material that can be used for a variety of applications. Some common applications include:
If you are looking for a high-strength, weldable steel for your next project, S355J2 Round Bar is a good option to consider.
Here are some suppliers of S355J2 Round Bar:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Flat |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
DIN 1.2767 tool steel is a type of high-alloy tool steel that is known for its high hardness, toughness, and wear resistance. It is often used in the manufacture of dies, molds, and other tools that require high wear resistance.
DIN 1.2767 is a high-carbon, high-chromium, high-nickel, and high-molybdenum steel that is typically supplied in the hardened and tempered condition. The hardness of DIN 1.2767 can vary depending on the tempering temperature. The most common tempering temperature for DIN 1.2767 is 200-220°C (390-425°F).
DIN 1.2767 is a good choice for applications where high hardness, toughness, and wear resistance are required. Some common applications of DIN 1.2767 include:
Here are some of the advantages of using DIN 1.2767:
Here are some of the disadvantages of using DIN 1.2767:
Overall, DIN 1.2767 is a good choice for applications where high hardness, toughness, and wear resistance are required. However, it is more expensive than other types of steel, so it may not be the best choice for all applications.
Here are some additional details about DIN 1.2767 tool steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Material | Stainless Steel |
Shape | Square |
Model Name/Number | T22 F22 P22 Steel Block /T22 / F22 P22 Steel Square Bars |
Material Grade | T22 F22 P22 |
Steel Type | Mild Steel |
I Deal In | New Only |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Form | Bars |
Usage/Application | Oil & Gas Industry |
Grade | P5 |
Material | P5 ROUND BARS |
Shape | ROUND |
P5 round bars are available in a variety of sizes and shapes, and they can be machined to the desired dimensions. They are a good choice for applications where high strength, toughness, and wear resistance are required.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm -20mm |
Material | Carbon Steel |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Minimum Order Quantity | 1000 KG |
Standard | W.Nr. X153CrMoV12 |
Surface Treatment | Annealed |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm -20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Minimum Order Quantity | 1000 KG |
Standard | P9 |
Surface Treatment | Annealed |
P9 round bars are available in a variety of sizes and shapes, and they can be machined to the desired dimensions. They are a good choice for applications where high strength, toughness, and wear resistance are required.
Here are some of the applications of P9 round bars:
P9 round bars are a versatile material that can be used in a variety of applications. They are a good choice for applications where high strength, toughness, and wear resistance are required.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm -20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Minimum Order Quantity | 1000 KG |
Standard | DIN 1.2367 |
Surface Treatment | Annealed |
Ultimate Tensile Strength (UTS) | 1,800-2,000 MPa |
The chemical composition of DIN 1.2367 is as follows:
The typical mechanical properties of DIN 1.2367 are as follows:
DIN 1.2367 is a high-performance material that is used in demanding applications. It is a good choice for applications where wear resistance, toughness, and hardenability are critical.
Here are some of the specific applications of DIN 1.2367:
If you are looking for a high-performance steel with wear resistance, toughness, and hardenability, DIN 1.2367 is a good option to consider.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Carbon Steel |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Hardness after quenching HRC | 58-62 HRC |
W.Nr. X210Cr12 Cold Working Tool Steel DIN X210Cr12 Bar is a type of steel bar that is used in a variety of applications, including the manufacture of dies, punches, and other tools that are used to work metal at cold temperatures. It is a high-carbon, high-chromium steel that has excellent wear resistance and toughness.
The chemical composition of W.Nr. X210Cr12 Cold Working Tool Steel DIN X210Cr12 Bar is as follows:
The mechanical properties of W.Nr. X210Cr12 Cold Working Tool Steel DIN X210Cr12 Bar are as follows:
W.Nr. X210Cr12 Cold Working Tool Steel DIN X210Cr12 Bar is typically available in diameters from 10 to 200 mm and lengths up to 3 meters. It can be finished in a variety of ways, including black, bright, and polished.
The following are some of the specific applications of W.Nr. X210Cr12 Cold Working Tool Steel DIN X210Cr12 Bar:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Usage/Application | Construction |
Material | Carbon Steel |
Single Piece Length | 6 meter |
Hardness | 58-62 HRC |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | DIN 1.2379 |
Surface Treatment | Annealed |
Ultimate Tensile Strength (UTS) | 1,800-2,000 MPa |
Test Certificates | Available |
Here is a table that summarizes the chemical composition of DIN 1.2379 Cold Work Tool Steel 1.2379:
Element | Percentage | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon | 1.2% | ||||||||||||||||||
Chromium | 12% | ||||||||||||||||||
Molybdenum | 1% | ||||||||||||||||||
Vanadium | 0.9% | ||||||||||||||||||
Manganese | 0.4% | ||||||||||||||||||
Silicon | 0.3% | ||||||||||||||||||
Sulfur | 0.03% | ||||||||||||||||||
Phosphorus | 0.035% Sure, here are some details about DIN 1.2379 Cold Work Tool Steel 1.2379 Bars:
Here is a table that summarizes the chemical composition of DIN 1.2379 Cold Work Tool Steel 1.2379:
The typical mechanical properties of DIN 1.2379 Cold Work Tool Steel 1.2379 are as follows:
DIN 1.2379 Cold Work Tool Steel 1.2379 is a high-performance material that is used in demanding applications. It is a good choice for applications where wear resistance, toughness, and hardenability are critical. |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm -20mm |
Material | Carbon Steel |
Single Piece Length | 6 meter |
Usage/Application | Construction |
Minimum Order Quantity | 1000 KG |
Standard | W.Nr. 1.2379 Bar / DIN X155CrVMo12-1 Steel 2379 |
Surface Treatment | Annealed |
Ultimate Tensile Strength (UTS) | 1,800-2,000 MPa |
The chemical composition of W.Nr. 1.2379 is as follows:
The typical mechanical properties of W.Nr. 1.2379 are as follows:
W.Nr. 1.2379 is a high-performance material that is used in demanding applications. It is a good choice for applications where wear resistance, toughness, and hardenability are critical.
Here are some of the specific applications of W.Nr. 1.2379:
If you are looking for a high-performance steel with wear resistance, toughness, and hardenability, W.Nr. 1.2379 is a good option to consider.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Usage/Application | Construction |
Material | Carbon Steel |
Single Piece Length | 6 meter |
Hardness | 58-62 HRC (after heat treatment) |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | JIS SKD11 |
Surface Treatment | Cold Rolled |
Ultimate Tensile Strength (UTS) | 1200-1400 MPa (after heat treatment) |
Test Certificates | Available |
Surface Condition | ANNEALED |
The chemical composition of JIS SKD11 cold working tool steel is:
The properties of JIS SKD11 cold working tool steel include:
JIS SKD11 cold working tool steel is used in a variety of applications, including:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Usage/Application | Construction |
Shape | Square |
Material Grade | W.Nr. X205Cr12KU |
Alloy | Without Alloy |
Additional Information:
Approx. Rs 100 / KgGet Latest Price
Product Details:Material Grade | H13/D2/M2/S7/A2/M42 |
Brand | Domestic Mills |
Single Piece Length | 6 meter, 18 meter, 36 meter, 3 meter |
Technique | Hot Rolled |
Application | Construction, Automobile Industry,Pharmaceutical / Chemical Industry,Oil & Gas Industry |
Thickness/Diameter | 2-3 inch, 1-2 inch, 0-1 inch |
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Stainless Steel |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | 5000 KG |
H11 hot die steel rod has the following chemical composition:
H11 hot die steel rod has the following properties:
H11 hot die steel rod is used in a variety of applications, including:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Construction |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | M42 |
Surface Treatment | Annealed |
Test Certificates | Available |
Overall, M42 High Speed Steel is a good choice for applications where high hardness, strength, and wear resistance are required. However, it is more expensive than other types of steel, so it may not be the best choice for all applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Usage/Application | Construction |
Material | Carbon Steel |
Single Piece Length | 6 meter |
Hardness | 57-58 HRC |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | DIN 1.2080 |
Surface Treatment | Annealed |
Test Certificates | Available |
DIN 1.2080, also known as D3 or SKD1, is a high-carbon, high-chromium cold work tool steel. It is characterized by its high wear resistance and toughness, making it ideal for applications where cutting or forming materials at low temperatures is required.
DIN 1.2080 is typically supplied in the annealed condition, which makes it easy to machine. However, it must be hardened and tempered to achieve its full properties. The recommended hardness for DIN 1.2080 is 57-58 HRC.
DIN 1.2080 is used in a variety of applications, including:
DIN 1.2080 is a versatile and high-performance tool steel that is well-suited for a variety of demanding applications.
Here are some additional properties of DIN 1.2080 cold work tool steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Stainless Steel |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 kg |
Packaging Type | AS PER CLIENT REQUIREMENT |
W.Nr. 55NiCrMoV6 is a versatile tool steel that is well-suited for a variety of demanding applications. It is a good choice for applications where high hardness, toughness, and wear resistance are required, and where good machinability is also important.
Here are some of the benefits of using W.Nr. 55NiCrMoV6 hot die steel bars:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Flat |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
H11 hot work tool steel is a chromium-based steel alloy that is used in a variety of applications where high hardness, toughness, and resistance to thermal shock are required. It is commonly used in the manufacture of dies, molds, and other tooling that is subjected to high temperatures and stresses.
H11 tool steel has the following properties:
Some of the common applications of H11 hot work tool steel include:
H11 tool steel is available in a variety of forms, including bars, billets, plates, and forgings. It can be purchased from a variety of suppliers, both domestic and international.
Here are some of the advantages of using H11 hot work tool steel:
Here are some of the disadvantages of using H11 hot work tool steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Size | 3 inch |
Usage/Application | Construction |
Shape | Round |
Material Grade | H13 |
Alloy | With Alloy |
Country of Origin | Made in India |
Chemical composition:
Properties:
Applications:
H-13 tool steel is a versatile and high-performance steel that is used in a wide variety of applications. It is known for its excellent combination of toughness, wear resistance, and machinability. H-13 is a hot work tool steel, which means that it can withstand high temperatures without losing its properties. This makes it ideal for applications such as die casting, forging, and extrusion. H-13 is also a good choice for cold work tooling, such as punches and dies.
If you are looking for a high-performance tool steel that can withstand demanding applications, then H-13 is a good option.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Grade | P20 |
Usage/Application | Construction |
Material | DIN 1.2738 |
Hardness | 280-320 HB |
DIN 1.2738 is a versatile tool steel that is well-suited for a variety of plastic mold applications. It is known for its good machinability, toughness, wear resistance, and corrosion resistance. DIN 1.2738 bars are a good choice for applications where high dimensional accuracy and surface finish are required.
Here are some of the benefits of using DIN 1.2738 plastic mold steel bars:
If you are looking for a high-alloy tool steel for your plastic mold application, DIN 1.2738 is a good option to consider.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Industrial |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
AISI L6 Hot Die Steel, also known as SAE L6, is a high-carbon, chromium-molybdenum alloy steel that is used in a variety of applications where high strength and toughness are required. It is often used in the manufacture of hot-working dies, punches, and shear blades.
AISI L6 steel has a high yield strength and tensile strength, making it well-suited for applications where high loads are encountered. It also has good toughness, which means that it can withstand impact without breaking.
AISI L6 steel is available in a variety of sizes and finishes. It is typically supplied in the hardened and tempered condition, but it can also be supplied in the annealed condition.
The mechanical properties of AISI L6 steel vary depending on the size and condition of the bar. However, they typically have a yield strength of 360 MPa (52,000 psi) and an ultimate tensile strength of 690 MPa (100,000 psi).
AISI L6 steel is a good choice for applications where high strength, toughness, and wear resistance are required. Some common applications of AISI L6 steel include:
Here are some of the advantages of using AISI L6 Hot Die Steel:
Here are some of the disadvantages of using AISI L6 Hot Die Steel:
Overall, AISI L6 Hot Die Steel is a good choice for applications where high strength, toughness, and wear resistance are required. However, it is more expensive than other types of steel, so it may not be the best choice for all applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Carbon Steel |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Flat |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Overall, DIN 1.2714 hot die steel 2714 flat bars are a versatile and high-performance material that is well-suited for a variety of demanding applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Carbon Steel |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Here are some places in Mumbai where you can buy DIN 1.2343 tool die steel 2343 bars:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Carbon Steel |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
X38CrMoV5-1 KU tool steel bar is a high-performance alloy die steel that is used in a variety of applications where high hardness, toughness, and resistance to wear and corrosion are required. It is commonly used in the manufacture of dies, molds, and other tooling that is subjected to high temperatures and stresses.
X38CrMoV5-1 KU tool steel has the following properties:
Some of the common applications of X38CrMoV5-1 KU tool steel include:
X38CrMoV5-1 KU tool steel is available in a variety of forms, including bars, billets, plates, and forgings. It can be purchased from a variety of suppliers, both domestic and international.
Here are some of the advantages of using X38CrMoV5-1 KU tool steel:
Here are some of the disadvantages of using X38CrMoV5-1 KU tool steel:
Additional Information:
Explore More Products
© Kanungo Ferromet Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited