Girgaon, Mumbai, Maharashtra
GST No. 27AABCK0892N1Z4
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 21mm & above |
Material | Stainless Steel |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Minimum Order Quantity | 1000KG |
Standard | 19MnCr18 Cr-Mn-N |
Surface Treatment | Annealed |
Nonmagnetic stainless steel refers to a type of stainless steel that exhibits low or no magnetic properties. While most stainless steels have some degree of magnetic response due to the presence of ferrite, nonmagnetic stainless steels are specifically designed to have minimal or no magnetic properties.
There are several grades of nonmagnetic stainless steel available, such as:
Austenitic stainless steels: Grades like 304, 316, and 904L are known for their nonmagnetic properties. These stainless steels are composed primarily of austenite, which is nonmagnetic in nature.
Duplex stainless steels: Some duplex stainless steels, such as grades like 2205 (UNS S32205) and 2507 (UNS S32750), exhibit a combination of austenitic and ferritic microstructures. They may display slight magnetic properties, but their overall magnetic response is relatively low compared to fully ferritic stainless steels.
It's important to note that while nonmagnetic stainless steels have reduced magnetic properties, they may still exhibit some degree of magnetism depending on factors such as the manufacturing process, composition, and the presence of external magnetic fields.
Nonmagnetic stainless steel bars are available in various forms, including round bars, square bars, hexagonal bars, and flat bars. These bars are used in a wide range of applications, including in the aerospace industry, medical equipment, electronic components, and in environments where magnetic interference needs to be minimized.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
:
SS 2127 alloy steel is a high-strength, medium-alloy steel that is known for its good combination of strength, toughness, and corrosion resistance. It is often used in applications where high loads and corrosion are present, such as shafts, axles, and marine components.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and corrosion resistance.
SS 2127 alloy steel is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
If you are looking for a high-strength, tough, and corrosion-resistant alloy steel, then Chrome Moly EN 34CrNiMo6 Alloy Steel Bars are a good option.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
P2000 Cr-Mn-N Steel Round Bar,Rods, Bars,DIN/EN P2000 Nonmagnetic Stainless Steel Bar. It is a non-magnetic stainless steel alloy that is commonly used in applications where magnetic fields are present, such as in the medical and aerospace industries. It is also known for its high strength and corrosion resistance.
The chemical composition of P2000 Cr-Mn-N Steel Round Bar is as follows:
The mechanical properties of P2000 Cr-Mn-N Steel Round Bar are as follows:
The corrosion resistance of P2000 Cr-Mn-N Steel Round Bar is very good, and it can be used in a wide range of corrosive environments. It is also resistant to pitting and crevice corrosion.
P2000 Cr-Mn-N Steel Round Bar is available in a variety of sizes and shapes, including round, square, and hexagonal bars. It can be supplied in both hot-rolled and cold-drawn forms.
Some of the applications of P2000 Cr-Mn-N Steel Round Bar include:
If you are looking for a non-magnetic stainless steel alloy with high strength and corrosion resistance, then P2000 Cr-Mn-N Steel Round Bar is a good option.
Here are some of the advantages of using P2000 Cr-Mn-N Steel Round Bar:
Here are some of the disadvantages of using P2000 Cr-Mn-N Steel Round Bar:
Overall, P2000 Cr-Mn-N Steel Round Bar is a good choice for applications where high strength, corrosion resistance, and non-magnetic properties are important.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | 31CrMoV9 |
Surface Treatment | Annealed |
Test Certificates | Available |
Product Type | 31CrMoV9 Nitriding Steel Bar / 1.8519 Alloy Steel Round Bars |
Here are some of the applications of 31CrMoV9 steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
P900 Cr-Mn-N Steel Round Bar is a non-magnetic stainless steel alloy with a higher chromium content than P300 Cr-Mn-N Steel Round Bar. The chemical composition of P900 Cr-Mn-N Steel Round Bar is as follows:
The mechanical properties of P900 Cr-Mn-N Steel Round Bar are as follows:
The corrosion resistance of P900 Cr-Mn-N Steel Round Bar is very good, and it can be used in a wide range of corrosive environments. It is also resistant to pitting and crevice corrosion.
P900 Cr-Mn-N Steel Round Bar is available in a variety of sizes and shapes, including round, square, and hexagonal bars. It can be supplied in both hot-rolled and cold-drawn forms.
Some of the applications of P900 Cr-Mn-N Steel Round Bar include:
If you are looking for a non-magnetic stainless steel alloy with high strength and corrosion resistance, then P900 Cr-Mn-N Steel Round Bar is a good option.
Here are some of the differences between P900 Cr-Mn-N Steel Round Bar and P300 Cr-Mn-N Steel Round Bar:
The best choice for you will depend on your specific application and requirements. If you need the best possible corrosion resistance, then P900 is the better choice. If you are on a budget, then P300 may be a better option.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm -20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Construction |
Minimum Order Quantity | 1000 KG |
Standard | AS PER CLIENT REQUIREMENT |
The chemical composition of X13CrMnMoN18-14-3 is as follows:
The typical mechanical properties of X13CrMnMoN18-14-3 are as follows:
X13CrMnMoN18-14-3 is a high-performance material that is used in demanding applications. It is a good choice for applications where corrosion resistance and non-magnetic properties are critical.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Stainless Steel |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Size Range for DIN / ENx40MnCr18 Round Bars: 6mm upto 200mm
Length for DIN / ENx40MnCr18 Round Bars: 10mm upto 6000mm depending on material grade & size.
Type of DIN / ENx40MnCr18 Round Bars: Hot Forged & Cold Forged.
Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered
Surface Finish for DIN / ENx40MnCr18 Round Bars: Bright & Black
DIN / ENx40MnCr18 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
X55MnCrN18-4 Cr-Mn-N Steel Round Bar, Rods, Bars, DIN/EN X55MnCrN18-4 Nonmagnetic Stainless Steel Bar is a high nitrogen stainless steel that is used in a variety of applications, including:
This steel has excellent mechanical properties and corrosion resistance, making it well-suited for use in demanding environments. It is also non-magnetic, which makes it suitable for use in applications where magnetic fields are present.
The chemical composition of X55MnCrN18-4 Cr-Mn-N Steel is as follows:
The mechanical properties of X55MnCrN18-4 Cr-Mn-N Steel are as follows:
The corrosion resistance of X55MnCrN18-4 Cr-Mn-N Steel is excellent, and it is resistant to a wide range of corrosive environments. This steel is also biocompatible, making it suitable for use in medical devices.
X55MnCrN18-4 Cr-Mn-N Steel is typically manufactured by hot rolling or forging, and it can be further processed by machining or heat treatment. This steel is available in a variety of sizes and shapes, and it can be used in a wide range of applications.
Some of the key benefits of X55MnCrN18-4 Cr-Mn-N Steel include:
If you are looking for a high-performance steel for use in demanding applications, X55MnCrN18-4 Cr-Mn-N Steel is a good option to consider.
Here are some additional information about X55MnCrN18-4 Cr-Mn-N Steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | AS PER CLIENT REQUIREMENT |
X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar. It is a non-magnetic stainless steel alloy that is commonly used in applications where magnetic fields are present, such as in the medical and aerospace industries. It is also known for its high strength and corrosion resistance.
The chemical composition of X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar is as follows:
The mechanical properties of X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar are as follows:
The corrosion resistance of X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar is very good, and it can be used in a wide range of corrosive environments. It is also resistant to pitting and crevice corrosion.
X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar is available in a variety of sizes and shapes, including round, square, and hexagonal bars. It can be supplied in both hot-rolled and cold-drawn forms.
Some of the applications of X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar include:
If you are looking for a non-magnetic stainless steel alloy with high strength and corrosion resistance, then X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar is a good option.
Here are some of the advantages of using X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar:
Here are some of the disadvantages of using X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar:
Overall, X5MnCrNiN18-13 Cr-Mn-N Steel Round Rods, Bars,DIN/EN X5MnCrNiN18-13 Nonmagnetic Stainless Steel Bar is a good choice for applications where high strength, corrosion resistance, and non-magnetic properties are important.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm -20mm |
Material | Stainless Steel |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Minimum Order Quantity | 1000 KG |
Standard | X8CrMnN18-18 Cr-Mn-N |
Surface Treatment | Annealed |
X8CrMnN18-18 Cr-Mn-N Steel Round Bar, Rods, Bars, DIN/EN X8CrMnN18-18 Nonmagnetic Stainless Steel Bar is a high nitrogen stainless steel that is used in a variety of applications, including:
This steel has excellent mechanical properties and corrosion resistance, making it well-suited for use in demanding environments. It is also non-magnetic, which makes it suitable for use in applications where magnetic fields are present.
The chemical composition of X8CrMnN18-18 Cr-Mn-N Steel is as follows:
The mechanical properties of X8CrMnN18-18 Cr-Mn-N Steel are as follows:
The corrosion resistance of X8CrMnN18-18 Cr-Mn-N Steel is excellent, and it is resistant to a wide range of corrosive environments. This steel is also biocompatible, making it suitable for use in medical devices.
X8CrMnN18-18 Cr-Mn-N Steel is typically manufactured by hot rolling or forging, and it can be further processed by machining or heat treatment. This steel is available in a variety of sizes and shapes, and it can be used in a wide range of applications.
Some of the key benefits of X8CrMnN18-18 Cr-Mn-N Steel include:
If you are looking for a high-performance steel for use in demanding applications, X8CrMnN18-18 Cr-Mn-N Steel is a good option to consider.
Here are some additional information about X8CrMnN18-18 Cr-Mn-N Steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Stainless Steel |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Here is a table that summarizes the chemical composition of X8CrMnN19-19 Cr-Mn-N Steel:
Element | Percentage |
---|---|
Carbon | 0.12% |
Chromium | 18.5% |
Manganese | 1.1% |
Molybdenum | 1% |
Nitrogen | 0.15% |
Silicon | 0.3% |
Sulfur | 0.03% |
Phosphorus | 0.035% |
The typical mechanical properties of X8CrMnN19-19 Cr-Mn-N Steel are as follows:
X8CrMnN19-19 Cr-Mn-N Steel is a high-performance material that is used in demanding applications. It is a good choice for applications where corrosion resistance and non-magnetic properties are critical.
Here are some of the specific applications of X8CrMnN19-19 Cr-Mn-N Steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
X8CrMnN20-10 is a non-magnetic, austenitic stainless steel that is used in a variety of applications where resistance to corrosion and wear is required. It has a composition of 0.12% carbon, 20% chromium, 10% manganese, 0.2% nitrogen, and the balance iron.
X8CrMnN20-10 has excellent resistance to corrosion, including pitting, crevice corrosion, and stress corrosion cracking. It is also highly resistant to wear, making it an ideal choice for applications where these properties are important.
X8CrMnN20-10 is available in a variety of forms, including round bar, rods, and bars. It can be machined, welded, and heat-treated to meet specific requirements.
Here are some of the key properties of X8CrMnN20-10:
X8CrMnN20-10 is used in a variety of applications, including:
If you are looking for a non-magnetic, austenitic stainless steel with excellent resistance to corrosion and wear, X8CrMnN20-10 is a good option to consider.
Here are some specific applications where X8CrMnN20-10 is commonly used:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 16 mm |
Shape | Round |
Single Piece Lengh | 9 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
JIS SNCM220 alloy steel is a high-strength, medium-alloy steel that is known for its good combination of strength, toughness, and wear resistance. It is often used in applications where high loads and impact are present, such as gears, shafts, and axles.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and wear resistance.
JIS SNCM220 alloy steel is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Here are some of the applications of EN30B steel:
If you are interested in using EN30B steel for your project, you should contact a steel supplier to discuss your requirements.
BS 970 Grade 835M30 is the British Standard equivalent of EN30B. The chemical composition and properties of BS 970 Grade 835M30 are the same as EN30B.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Here are some of the applications of ASTM A335 Grade P5 steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Here are some of the applications of DIN 1.7225 steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | X11CrMo9-1 Alloy Steel X11CrMo9-1 Round Bars |
Surface Treatment | Annealed |
Test Certificates | Available |
Product Type | ALLOY STEEL |
Here are some of the applications of X11CrMo9-1 steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Diameter | 13mm- 20mm |
Material | Alloy Steels |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Delivery Details | Immediately |
Minimum Order Quantity | 1000 KG |
Standard | 12CrMo19-5 |
Surface Treatment | Annealed |
Test Certificates | Available |
12CrMo19-5 steel is a high-chromium, high-molybdenum alloy steel that is used in a variety of applications, including pressure vessels, gears, and shafts. It is known for its good strength, toughness, and resistance to wear and corrosion.
The chemical composition of 12CrMo19-5 steel is as follows:
The minimum yield strength of 12CrMo19-5 steel is 700MPa, and the tensile strength is 1100MPa.
12CrMo19-5 steel can be heat treated to increase its strength. The steel can be quenched and tempered to achieve a yield strength of up to 1500MPa.
Here are some of the benefits of using 12CrMo19-5 steel:
If you are looking for a strong, durable, and versatile steel bar for your pressure vessel, gear, or shaft application, then 12CrMo19-5 steel is a good option.
Here are some of the applications of 12CrMo19-5 steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Surface Finish | Polished |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
:
Alloy steel 17Cr3 is a high-strength, low-alloy steel that is known for its good combination of strength, toughness, and wear resistance. It is often used in applications where high loads and impact are present, such as gears, shafts, and axles.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and wear resistance.
Alloy steel 17Cr3 is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
Here are some of the common applications of alloy steel 17Cr3:
Additional Information:
Approx. Rs 498 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
If you are looking for a high-strength, tough, and corrosion-resistant alloy steel, then Chrome Moly SAE AISI 4130 Alloy Steel Bars are a good option.
Here are some of the advantages of using Chrome Moly SAE AISI 4130 Alloy Steel Bars:
Here are some of the disadvantages of using Chrome Moly SAE AISI 4130 Alloy Steel Bars:
Overall, Chrome Moly SAE AISI 4130 Alloy Steel Bars are a good choice for applications where high strength, toughness, and corrosion resistance are important.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Some of the applications of X12CrMo5 Alloy Steel X12CrMo5 Round Bars include:
If you are looking for a high-strength, high-alloy steel with good toughness and wear resistance, then X12CrMo5 Alloy Steel X12CrMo5 Round Bars are a good option.
The X12CrMo5 designation is a German standard for this type of alloy steel. It is also known as AISI 4140 in some countries.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Some of the applications of ASTM A350 LF6 Class 2 Alloy Steel LF6 Round Bars include:
If you are looking for a high-strength, tough, and corrosion-resistant alloy steel for applications where high temperature is also a factor, then ASTM A350 LF6 Class 2 Alloy Steel LF6 Round Bars are a good option.
The LF6 designation in ASTM A350 stands for Low-Ferrite. This means that the steel has a lower amount of ferrite, which is a type of iron. Ferrite is known for being brittle, so having a lower amount of ferrite in the steel makes it more ductile and resistant to cracking.
The Class 2 designation in ASTM A350 stands for the notch toughness requirements of the steel. Class 2 steel has the second highest notch toughness requirements, making it less likely to crack.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
GOST 18KHG alloy steel bar is a high-strength, wear-resistant steel that is commonly used in construction, machinery, and transportation applications. It is made of a combination of chromium, molybdenum, and vanadium, which gives it its high strength and wear resistance. GOST 18KHG alloy steel bar is available in a variety of sizes and shapes, including round bars, square bars, and hex bars.
Here are some of the properties of GOST 18KHG alloy steel bar:
Here are some of the applications of GOST 18KHG alloy steel bar:
If you are looking for a high-strength, wear-resistant steel for your application, then GOST 18KHG alloy steel bar is a good option. It is available in a variety of sizes and shapes, and it has a wide range of applications.
Here are some suppliers of GOST 18KHG alloy steel bar in Mumbai, India:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
The mechanical properties of Chrome Moly 30CrMo4 Alloy Steel Bars are as follows:
Chrome Moly 30CrMo4 Alloy Steel Bars can be heat treated to a hardness of 260-300 HB, which gives them excellent fatigue resistance and wear resistance. They are also available in a variety of sizes and shapes, including round, square, and hexagonal bars. They can be supplied in both hot-rolled and cold-drawn forms.
Some of the applications of Chrome Moly 30CrMo4 Alloy Steel Bars include:
If you are looking for a high-strength, tough, and wear-resistant alloy steel for applications where high temperature is also a factor, then Chrome Moly 30CrMo4 Alloy Steel Bars are a good option.
The 30CrMo4 designation is a German standard for this type of alloy steel. It is also known as 1.7225 in some countries.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
W.Nr. 40NiCrMo6 is a type of alloy steel that is commonly used in applications where high strength, toughness, and corrosion resistance are important. It is made up of the following elements:
Carbon: 0.2-0.25%
Chromium: 17-18%
Nickel: 4-5%
Molybdenum: 0.5-0.7%
The mechanical properties of W.Nr. 40NiCrMo6 Chrome Moly Alloy Steel Bars are as follows:
W.Nr. 40NiCrMo6 Chrome Moly Alloy Steel Bars can be heat treated to a hardness of 260-300 HB, which gives them excellent fatigue resistance and wear resistance. They are also available in a variety of sizes and shapes, including round, square, and hexagonal bars. They can be supplied in both hot-rolled and cold-drawn forms.
Some of the applications of W.Nr. 40NiCrMo6 Chrome Moly Alloy Steel Bars include:
If you are looking for a high-strength, tough, and corrosion-resistant alloy steel for applications where high temperature is also a factor, then W.Nr. 40NiCrMo6 Chrome Moly Alloy Steel Bars are a good option.
The W.Nr. 40NiCrMo6 designation is a German standard for this type of alloy steel. It is also known as 1.4903 in some countries.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
The mechanical properties of W.Nr. 20NiCrMo2 Alloy Steel Chrome Moly Bars are as follows:
W.Nr. 20NiCrMo2 Alloy Steel Chrome Moly Bars can be heat treated to a hardness of 250-300 HB, which gives them excellent fatigue resistance and wear resistance. They are also available in a variety of sizes and shapes, including round, square, and hexagonal bars. They can be supplied in both hot-rolled and cold-drawn forms.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
The mechanical properties of Chrome Moly DIN 1.6522 Alloy Steel Bars are as follows:
Chrome Moly DIN 1.6522 Alloy Steel Bars can be heat treated to a hardness of 260-300 HB, which gives them excellent fatigue resistance and wear resistance.
They are also available in a variety of sizes and shapes, including round, square, and hexagonal bars.
They can be supplied in both hot-rolled and cold-drawn forms.
Some of the applications of Chrome Moly DIN 1.6522 Alloy Steel Bars include:
If you are looking for a high-strength, tough, and wear-resistant alloy steel for applications where high temperature is also a factor, then Chrome Moly DIN 1.6522 Alloy Steel Bars are a good option.
The DIN 1.6522 designation is a German standard for this type of alloy steel. It is also known as 13CrMo44 in some countries.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Chrome Moly 40CrMo4 (also known as 1.7225) is a type of alloy steel that is commonly used in applications where high strength, toughness, and wear resistance are important. It is made up of the following elements:
The mechanical properties of Chrome Moly 40CrMo4 Alloy Steel Bars are as follows:
Chrome Moly 40CrMo4 Alloy Steel Bars can be heat treated to a hardness of 260-300 HB, which gives them excellent fatigue resistance and wear resistance. They are also available in a variety of sizes and shapes, including round, square, and hexagonal bars. They can be supplied in both hot-rolled and cold-drawn forms.
Some of the applications of Chrome Moly 40CrMo4 Alloy Steel Bars include:
If you are looking for a high-strength, tough, and wear-resistant alloy steel for applications where high temperature is also a factor, then Chrome Moly 40CrMo4 Alloy Steel Bars are a good option.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Construction |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
If you are looking for a high-strength, high-temperature alloy steel with good fatigue resistance and wear resistance, then 1.7709 Round Bar is a good option.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | AS PER CLIENT REQUIREMENT |
Alloy steel 1.6745 is a high-strength, medium-alloy steel that is known for its good combination of strength, toughness, and wear resistance. It is often used in applications where high loads and impact are present, such as gears, shafts, and axles.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and wear resistance.
Alloy steel 1.6745 is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 9 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Alloy steel C40E is a medium carbon, low-alloy steel that is known for its good combination of strength, toughness, and machinability. It is often used in applications where high loads and impact are not present, such as machined parts, welded structures, and general engineering applications.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and machinability.
Alloy steel C40E is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
Here are some of the common applications of alloy steel C40E:
Alloy steel C40E is a versatile and affordable material that can be used in a wide range of applications. It is strong, tough, machinable, and easy to weld, making it a good choice for many different applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Alloy steel 070M20 is a general-purpose, low-alloy steel that is known for its good combination of strength, toughness, and weldability. It is often used in applications where high loads are not present, such as machined parts, welded structures, and general engineering applications.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and weldability.
Alloy steel 070M20 is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
Here are some of the common applications of alloy steel 070M20:
Alloy steel 070M20 is a versatile and affordable material that can be used in a wide range of applications. It is strong, tough, weldable, and easy to machine, making it a good choice for many different applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
Alloy steel 27MnCrB5 is a high-strength, medium-alloy steel that is known for its good combination of strength, toughness, and wear resistance. It is often used in applications where high loads and impact are present, such as gears, shafts, and axles.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and wear resistance.
Alloy steel 27MnCrB5 is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
BS 590M17 alloy steel is a high-strength, medium-alloy steel that is known for its good combination of strength, toughness, and wear resistance. It is often used in applications where high loads and impact are present, such as gears, shafts, and axles.
It is also used in the manufacturing of tools and dies, springs, and other components that require high strength and wear resistance.
BS 590M17 alloy steel is available in a variety of shapes and sizes, including bars, plates, and tubes. It is also available in a variety of heat treatment conditions, including annealed, normalized, quenched, and tempered.
Here are some of the common applications of BS 590M17 alloy steel:
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Industrial |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
The chemical composition of P91 and F91 round bars is as follows:
The mechanical properties of P91 and F91 round bars vary depending on the heat treatment. However, typical properties include:
P91 and F91 round bars are a versatile material that can be used in a variety of applications, such as:
They are also used in applications where high strength, toughness, and resistance to corrosion and wear are important.
Here are some of the advantages of using P91 and F91 round bars:
Here are some of the disadvantages of using P91 and F91 round bars:
Overall, P91 and F91 round bars are a versatile material that offers a number of advantages over plain carbon steel. They are a good choice for applications where high strength, toughness, and resistance to corrosion and wear are important.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
If you are looking for a high-strength, tough, and wear-resistant alloy steel, then SAE AISI 8630 Alloy Steel Chrome Moly Bars are a good option.
thumb_up thumb_downtuneshareGoogle it
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
SCM420 alloy steel is a medium carbon, low alloy steel that is known for its high strength, toughness, and weldability. It is often used in applications where high wear resistance and fatigue strength are required, such as gears, shafts, and axles.
SCM420 alloy steel is also resistant to corrosion, making it a good choice for applications in harsh environments. It is available in a variety of shapes and sizes, including bars, plates, and tubes.
Some of the common applications of SCM420 alloy steel include:
SCM420 alloy steel is a versatile and high-performance material that can be used in a wide range of applications. It is strong, tough, resistant to corrosion, and weldable, making it a good choice for demanding applications.
Additional Information:
Approx. Rs 500 / KgGet Latest Price
Product Details:Minimum Order Quantity | 1000 Kg |
Thickness/Diameter | 20 mm |
Shape | Round |
Single Piece Lengh | 6 meter |
Steel Type | Alloy Steels |
Usage/Application | Manufacturing |
Surface Treatment | Annealed |
Packaging Size | 1000 KG |
Packaging Type | AS PER CLIENT REQUIREMENT |
SCM440H alloy steel is a high-strength, medium-alloy steel that is known for its good combination of strength, toughness, and wear resistance. It is often used in applications where high loads and impact are present, such as gears, shafts, and axles.
SCM440H alloy steel is also resistant to corrosion, making it a good choice for applications in harsh environments. It is available in a variety of shapes and sizes, including bars, plates, and tubes.
Some of the common applications of SCM440H alloy steel include:
SCM440H alloy steel is a versatile and high-performance material that can be used in a wide range of applications. It is strong, tough, resistant to corrosion, and weldable, making it a good choice for demanding applications.
thumb_up thumb_downtuneshareGoogle it
Additional Information:
Explore More Products
© Kanungo Ferromet Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited